Professional underfloor heating wiring services for homeowners and developers across the UK. Our certified electricians handle electric underfloor heating UK installations and wiring centre configuration for safe system control.
We also manage combi boiler underfloor heating wiring for wet systems. Every installation includes compliant connections, full testing, and proper documentation
For projects that involve multiple electrical upgrades, our team also provides complete electrical work services for residential properties.
Certified engineers for all gas work, safety checks, boiler installations, and compliance.
Electrical work carried out, tested, and certified to current UK regulations.
Public & employer liability insurance in place for complete peace of mind.
Consistently rated for workmanship, reliability, and project management.
Delivering home refurbishment and roofing projects with controlled processes, certified trades, and accountable project management.
Our wired underfloor heating installations are delivered as a managed electrical service. We assess the heating layout, confirm load requirements, and choose the correct wiring centre for underfloor heating before starting work.
We ensure proper termination inside the wiring centre, secure thermostat integration, and RCD protection. Whether for electric UFH wiring UK systems or combi boiler connections, all work is tested and certified.
Before system activation, electricians may also complete an EICR certification to verify electrical safety and compliance.
Correct wiring ensures system efficiency, safety, and long term reliability. Poor cable routing or loose connections can cause system failure, overheating, or thermostat issues.
Our electricians prevent problems like loose wire underfloor heating faults, overloaded circuits, and incorrect zoning connections. Whether for electric UFH wiring UK or combi boiler underfloor heating wiring, we ensure safe setup and reliable performance.
In older properties, heating upgrades may also require partial house rewiring to ensure safe electrical capacity.
Our underfloor heating wiring service covers full electrical configuration for both electric and wet systems. We begin with a structured assessment of the heating design, zoning requirements, and control interface before completing final connections.
We support electric underfloor heating UK projects requiring mat or cable connections, as well as wet systems requiring underfloor heating pump wiring and integration into a central wiring centre for underfloor heating. All installations are aligned with UK compliance standards and manufacturer specifications.
Where additional circuit protection is required, electricians may recommend consumer unit upgrades to support new heating loads.
We repair faulty heating wires, damaged sensors, loose thermostat connections, and tripping circuits for electric underfloor heating systems. Our diagnostic tools pinpoint the fault location without lifting the entire floor, reducing repair costs and disruption.
Before repairs, engineers assess cable resistance, sensor health, load values, and wiring centre connections to confirm compatibility. This helps restore heat performance quickly and safely while meeting UK wiring standards.
We specialise in full UFH rewiring projects. This includes replacing heating mats, rewiring manifolds, installing new thermostats, repositioning probe sensors, and configuring new wiring centres for multi-zone control.
Every installation follows UK wiring regulations and modern heating standards. All components—heating mats, actuators, wiring hubs, thermostats, zone valves, and control modules—are selected for durability, energy efficiency, and seamless control.
We inspect the heating layout and electrical supply, confirm zoning requirements, thermostat placement, and review existing wiring centre connections before work begins.
Includes: Site inspection, Circuit assessment, Zoning review, Preparation planning
Our electricians complete underfloor heating wiring, connecting heating mats or pipes to thermostats and configuring relays within the wiring centre.Control wiring often connects with nearby sockets and switches installation for thermostats and smart heating controls.
Includes: Thermostat wiring, Wiring centre setup, Pump connection, Compliance checks
The final stage focuses on system testing and verification, ensuring all circuits operate safely before heating system activation.
Includes: Electrical testing, Load verification, System labelling, Certification
Site visit and scope assessment
Transparent costs and timelines
Trades coordinated and managed
Snagging cleared, project closed
Yes, underfloor heating wiring must be carried out by a qualified electrician to ensure it is safe and compliant with UK regulations. Electric underfloor heating typically requires a dedicated circuit from your consumer unit, and all wiring must meet current BS 7671 standards. An electrician will also install the correct thermostat, temperature sensor, and any required RCD protection. Attempting to wire underfloor heating yourself without the correct qualifications is both dangerous and potentially illegal.
Yes, in most cases electric underfloor heating requires its own dedicated circuit from the consumer unit, particularly for larger installations over 16 amps. A qualified electrician will assess the load requirements of your system and install the appropriate circuit breaker and wiring. Sharing a circuit with other appliances can cause overloading and tripping issues. Our team will ensure your system is correctly wired and protected from the outset.
Electric underfloor heating thermostats typically require a 3-core plus earth 1.5mm cable for 230V systems, while some smart thermostats use screened network cables. The heating element itself consists of specialist resistance wire or heating mats that are embedded within the floor screed or adhesive layer. All cabling must be correctly sized for the load and routed safely to avoid damage during installation. Our electricians use only high-quality, appropriate materials for every underfloor heating installation.
Repairing a broken underfloor heating wire beneath a finished floor is a complex and often costly process. Prevention is always the best approach, which is why professional installation with proper testing before the floor is laid is essential. Before any screed or tiles are applied, a qualified electrician should carry out a resistance test on the heating cable to confirm it is undamaged. If a fault does occur after installation, specialist detection equipment can locate the break without fully lifting the floor.
Wet underfloor heating systems use a wiring centre to connect the boiler, pump, actuators, and zone thermostats from a single control point. Each heating zone has its own actuator valve and thermostat, all of which are wired back to a central wiring centre. A qualified electrician will connect the wiring centre to your boiler and ensure all zones operate correctly and independently. Proper wiring ensures efficient zone control and prevents issues such as the boiler firing unnecessarily.
The cost depends on the size of the area being heated, the number of zones required, and the complexity of the installation. Electric underfloor heating cable kits start from around £15 to £130 for the materials alone, with professional wiring and thermostat installation adding to the overall cost. Wet system wiring centres range from £35 to £350 depending on the number of zones. Contact us today for a free, no-obligation quote tailored to your specific underfloor heating project.
Reliable home refurbishment and roofing specialists delivering compliant, fully managed building work across the UK.
© 2026 EBT Build. All rights reserved.
