A plumbing system with an undersized pipe bore, a heating system balanced incorrectly across radiators, or a boiler installed without proper flue clearance will not perform safely or efficiently regardless of the brand. At EBT Build, every plumbing and heating job is carried out by Gas Safe registered engineers, assessed properly before work begins, and tested to current UK standards before handover.
We install, repair, and upgrade plumbing and heating systems for homeowners and landlords across Islington, Angel, Camden, Hackney, and Haringey. For properties with ageing or corroded pipework, our pipework replacement service covers full assessment, removal, and installation to current UK standards as one managed job, priced in writing after a free site visit.
Certified engineers for all gas work, safety checks, boiler installations, and compliance.
Electrical work carried out, tested, and certified to current UK regulations.
Public & employer liability insurance in place for complete peace of mind.
Consistently rated for workmanship, reliability, and project management.
Delivering home refurbishment and roofing projects with controlled processes, certified trades, and accountable project management.
Plumbing and heating failures rarely happen without warning signs. Pressure drops, slow drainage, cold spots on radiators, and inconsistent hot water are all indicators of underlying system issues. EBT Build engineers identify the root cause first, then carry out the correct fix, whether that is a targeted repair or a full system upgrade. All work is carried out to Gas Safe Register standards and signed off before handover.
EBT Build provides plumbing and heating services across London and North London, covering Islington, Angel, Camden, Hackney, and Haringey. Whether it is a straightforward repair or a full system upgrade, our certified engineers manage every job from assessment to sign-off. For properties requiring a new system, our boiler installation and servicing covers supply, fitting, and Gas Safe certification under one managed service.
We install, service, and repair gas boilers across North London for homeowners and landlords. Every boiler installation is carried out by Gas Safe registered engineers, sized correctly for the property’s heat demand, and completed with a full system commission, pressure test, and handover documentation before the engineer leaves the site.
We install, replace, and upgrade radiators across North London including panel, column, and designer radiator types in all standard sizes. Every installation includes correct radiator sizing for the room, secure wall mounting, TRV and lockshield valve fitting, system inhibitor treatment, and full circuit rebalancing before handover to ensure even heat distribution throughout the property.
We design and install wet and electric underfloor heating systems across North London for homeowners, landlords, and commercial clients. Every installation starts with a full heat loss calculation and floor construction assessment before any system is specified. Pipe spacing, insulation board selection, manifold sizing, and zone control configuration are all confirmed before any pipework is laid or any floor covering is fitted.
We install, replace, and repair vented and unvented hot water cylinders across North London. Every unvented cylinder installation is carried out by G3 qualified engineers, includes correct expansion vessel sizing, pressure relief valve configuration, and tundish installation, and is completed with a Building Regulations compliance certificate issued on handover.
We carry out full bathroom plumbing installations and upgrades across North London including bath, shower, basin, and WC connections, waste system installation, and hot and cold supply connections with isolation valves throughout. Every installation is pressure tested and flow checked before any surface is finished and the bathroom is handed over.
We install and repair kitchen sink plumbing, tap connections, waste trap systems, and appliance feeds across North London using WRAS approved components on all water supply connections. Every installation includes correct waste pipe gradient setting, isolation valve fitting on all supply connections, and full flow and leak testing before the job is signed off.
We replace hot and cold water supply pipework and central heating circuits across North London where existing pipes have corroded, developed pinhole leaks, or require rerouting as part of a wider renovation project. Every replacement includes a full pipe condition assessment and pressure test before any material is specified, and all central heating circuits are flushed, inhibitor treated, and recommissioned before handover.
We carry out thermal imaging, acoustic tracing, and tracer gas leak detection across North London to confirm the exact fault location before any surface is opened or any repair is recommended. Every investigation is documented in a written report with confirmed fault location, detection method used, and repair guidance provided before we leave the site.
We carry out drainage repairs and blockage clearance on internal and external drain systems across North London. Every drainage investigation includes a full drain condition assessment before any repair is recommended, and CCTV survey is available where the drain route or fault location cannot be confirmed by standard inspection methods.
A boiler that loses pressure because the expansion vessel was not checked, a radiator that stays cold because the system was never balanced after installation, a leak that returns because the joint was sealed over rather than replaced, these are the results of work carried out without a proper assessment of the underlying cause. At EBT Build, every plumbing and heating job starts with a full system assessment before any repair is quoted or any installation is specified.
We carry out plumbing and heating services across Islington, Angel N1,Camden, Hackney, Haringey, and surrounding North London areas for homeowners, landlords, and commercial clients. Whether the project involves a full boiler installation and servicing or a targeted leak detection investigation, every job is completed by our own Gas Safe registered engineers with no subcontracting, and every project is priced in writing before any work begins.
Every project starts with a detailed assessment. Existing systems are checked to identify faults, capacity, and upgrade requirements.
Includes: System inspection, Fault identification, Capacity assessment
Once planning is complete, all core works are carried out. This includes plumbing repairs, heating installations, and system adjustments.
Includes: Plumbing works, Heating installation, System testing
The final stage focuses on safety and performance. Systems are tested, balanced, and checked before handover.
Includes: Pressure testing, Safety verification, Final sign off
We visit your property in UK to assess the scope and requirements.
You receive transparent pricing and a clear timeline for your project.
All trades are coordinated and managed under one system.
Snagging is completed and the project is delivered to agreed standards.
Yes. EBT Build provides plumbing and heating services across Islington, Angel, Camden, Hackney, and Haringey. We also cover surrounding North London areas including Archway, Holloway, Dalston, Stoke Newington, and Finsbury Park. All work is carried out by our own Gas Safe registered engineers with no subcontracting involved. When you contact us, we arrange a free site visit before anything is quoted or booked. There are no call-out charges for the initial assessment.
Plumbing costs in London vary depending on the job type. A minor repair such as fixing a leaking tap or replacing a valve typically costs between £80 and £150 for the visit and labour. A full boiler installation ranges from £1,500 to £3,500 depending on boiler type, flue configuration, and whether pipework modifications are needed. Pipework replacement across a three-bedroom property typically falls between £2,000 and £5,000. EBT Build prices every job in writing after a free site assessment so you know the full cost before any work begins.
A boiler that is over 15 years old, requires frequent repairs, takes longer than usual to heat the property, or shows a rising gas bill without a change in usage is likely approaching the end of its reliable life. A boiler that trips out regularly, produces unusual noises, or shows an error code that resets without resolving the underlying fault should be assessed by a Gas Safe registered engineer before the next heating season. Servicing is appropriate when the boiler is under 10 years old and functioning correctly. EBT Build carries out a full diagnostic assessment and gives you an honest recommendation before quoting for either option.
A vented system uses a cold water storage tank, usually in the loft, to feed hot water at low pressure through gravity. An unvented system connects directly to the mains cold water supply and delivers hot water at mains pressure, which means stronger showers and faster fill times without a tank. Unvented systems must be installed by a G3 qualified engineer and commissioned to UK Building Regulations, including correct expansion vessel sizing and a calibrated pressure relief valve. EBT Build installs and services both system types and issues the required compliance certificate on completion.
Pipework replacement timescales depend on property size, pipe material, and access. Replacing the primary flow and return pipework on a two-bedroom flat typically takes two to three days. A full pipework replacement on a three or four-bedroom house, including removal of old copper or lead pipework and installation of new barrier pipe or copper throughout, usually takes four to seven days. Properties with original lead pipework installed before the 1970s should be treated as a priority given the health risks associated with lead leaching into drinking water. EBT Build confirms timelines in the written quote after the free site assessment.
Cold radiators on a working heating system are almost always caused by one of three things. Air trapped in the radiator circuit prevents hot water from circulating fully and is fixed by bleeding the radiator with a bleed key. Sludge and magnetite buildup inside the radiator restricts flow and requires a powerflush to clear. An incorrectly balanced system means some radiators receive too little flow because lockshield valves have not been set correctly across the circuit. If bleeding does not resolve the issue, the system needs a professional assessment. EBT Build carries out full heating system diagnostics as part of the site visit.
Gas Safe registration is legally required for any work involving gas pipework, gas appliances, boiler installation, or gas safety certificates. It is not required for general plumbing work such as replacing taps, installing a bathroom suite, or fixing leaks on water supply pipes. However, if your plumbing job involves connecting to a gas supply, moving a gas meter, or working near gas pipework, a Gas Safe registered engineer must carry out that element of the work. EBT Build employs Gas Safe registered engineers directly so both plumbing and gas work can be handled under one job without coordinating separate contractors.
Reliable home refurbishment and roofing specialists delivering compliant, fully managed building work across the UK.
© 2026 EBT Build. All rights reserved.